基于航空ATE的微波信号集中控制设计

doi:10.3969/j.issn.1006-2475.2013.10.016

计算机与现代化 ›› 2013, Vol. 218 ›› Issue (10): 62-64.doi: 10.3969/j.issn.1006-2475.2013.10.016

基于航空ATE的微波信号集中控制设计

姜茂仁¹，吴波²，陈琼²

1．海军航空工程学院青岛校区，山东青岛266041；2．南昌航空大学信息工程学院，江西南昌330063

收稿日期:2013-05-08 修回日期:1900-01-01 出版日期:2013-10-26 发布日期:2013-10-26

Design of Microwave Signal Centralized Control Based on Aeronautical ATE

JIANG Mao-ren ¹, WU Bo², CHEN Qiong²

1. Qingdao Branch of Naval Aeronautical and Astronautical University, Qingdao 266041, China; 2. School of Information Engineering, Nanchang Aeronautical University, Nanchang 330063, China

Received:2013-05-08 Revised:1900-01-01 Online:2013-10-26 Published:2013-10-26

摘要/Abstract

摘要： 在航空电子设备综合测试系统（ATE）中，通常存在被测信号工作频率高、频带宽、辐射性强等特点，本文将射频、微波信号传输与控制通过一个转接装置与被测设备相连，省去一些路径与开关环节，减少信号辐射、相互干扰和衰减。实践证明，该装置结构紧凑，信号路径短，使用稳定，寿命长，能较好地解决设备间电磁兼容等问题。

关键词: 自动检测设备（ATE）, 射频微波, 电磁兼容, 射频微波集中控制

Abstract: In ATE, electronic equipment has characteristic of high frequency, bandwidth and radiation signal. This paper takes the RF and microwave signal transmission and control to connect the device under test via an attached device, to eliminate path switch links and reduce signal radiation, mutual interference and fading. Practice has proved that the device structure is tight, the usage is stable, and the service life is long. It is a better way to solve the electromagnetic compatibility among instruments.

Key words: automated test equipment (ATE), RF and microwave, electromagnetic compatibility, RF and microwave centralized control

中图分类号:

TP273

姜茂仁;吴波;陈琼. 基于航空ATE的微波信号集中控制设计[J]. 计算机与现代化, 2013, 218(10): 62-64.

JIANG Mao-ren;WU Bo;CHEN Qiong. Design of Microwave Signal Centralized Control Based on Aeronautical ATE[J]. Computer and Modernization, 2013, 218(10): 62-64.

基于航空ATE的微波信号集中控制设计

Design of Microwave Signal Centralized Control Based on Aeronautical ATE

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

本文评价