CPCI总线加固计算机的规范化设计

doi:10.3969/j.issn.1006-2475.2013.09.029

计算机与现代化 ›› 2013, Vol. 1 ›› Issue (9): 117-120,.doi: 10.3969/j.issn.1006-2475.2013.09.029

CPCI总线加固计算机的规范化设计

梁俊¹，陈立芳²，王凡¹，班怀国¹

1.中国电子科技集团公司第十五研究所，北京 100083；2.中国人民解放军驻十一所军事代表室，北京 100015

收稿日期:2013-05-13 修回日期:1900-01-01 出版日期:2013-09-17 发布日期:2013-09-17

Standardized Design for Rugged Computer Based on CPCI

LIANG Jun¹, CHEN Li-fang², WANG Fan¹, BAN Huai-guo¹

1. 15th Research Institute of China Electronics Technology Group Corporation, Beijing 100083, China;2. Martial Delegate Office in North China Research Institute of Electro-optics, Beijing 100015, China

Received:2013-05-13 Revised:1900-01-01 Online:2013-09-17 Published:2013-09-17

摘要/Abstract

摘要： 从加固计算机的特点出发，阐述加固计算机实现规范化设计的可行性和意义。对当前主流的CPCI总线加固计算机，以CPCI总线规范为基础，结合工程实际，从结构和电气两个方面全面阐述CPCI总线加固计算机规范化设计的内容，突出规范化设计对提高产品质量的作用。

关键词: 加固计算机, CPCI总线, 规范化设计

Abstract: Starting from the characteristics of rugged computer, this paper expounds on its feasibility and significance of standardization design. For the current mainstream rugged computer based on CPCI bus, based on CPCI specifications, and combined with the actual needs of projects, the paper elaborates the standardization design content from two aspects of structure and electrical product, and highlights the effect of standardized design to improve product quality.

Key words: rugged computer, CPCI bus, standardized design

中图分类号:

TP338

梁俊;陈立芳;王凡;班怀国. CPCI总线加固计算机的规范化设计[J]. 计算机与现代化, 2013, 1(9): 117-120,.

LIANG Jun;CHEN Li-fang;WANG Fan;BAN Huai-guo. Standardized Design for Rugged Computer Based on CPCI[J]. Computer and Modernization, 2013, 1(9): 117-120,.

[1]	张雷;陈康;张在飞. 20路多种类串口卡的设计与实现[J]. 计算机与现代化, 2013, 1(8): 187-191.
[2]	李宁,李戴维 . 基于CPCI总线的抗恶劣环境HDLC通信卡的设计与实现[J]. 计算机与现代化, 2013, 12(12): 130-133.

CPCI总线加固计算机的规范化设计

Standardized Design for Rugged Computer Based on CPCI

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

本文评价