计算机与现代化 ›› 2013, Vol. 1 ›› Issue (9): 109-112,.doi: 10.3969/j.issn.1006-2475.2013.09.027

• 信息系统 • 上一篇    下一篇

基于PLC和组态软件的二氧化氯发生器监控系统

翟明戈1,薛 彬1,戈学珍2   

  1. 1.青岛滨海学院机电工程学院,山东 青岛 266555;2.青岛巨川环保科技有限公司,山东 青岛 266431
  • 收稿日期:2013-05-06 修回日期:1900-01-01 出版日期:2013-09-17 发布日期:2013-09-17

Chlorine Dioxide Generator Monitoring System Based on PLC and Configuration Software

ZHAI Ming-ge1, XUE Bin1, GE Xue-zhen2   

  1. 1. School of Mechanical and Electronic Engineering, Qingdao Binhai University, Qingdao 266555, China;2. Qingdao Juchuan Environmental Protection Technology Co., Ltd., Qingdao 266431, China
  • Received:2013-05-06 Revised:1900-01-01 Online:2013-09-17 Published:2013-09-17

摘要: 针对二氧化氯发生器监控系统的设计要求,利用西门子S7-200系列可编程逻辑控制器(PLC)作为数据采集和处理单元,选用西门子工业触摸屏Smart 1000 IE及其组态软件WinCC flexible 2008制作监控界面,并利用PLC以太网通讯模块CP243-1将监测报警延伸到远端控制室,实现对二氧化氯发生器的温度、压力、液位、流量、加药量等参数的监测、控制、报警等功能。测试表明系统性能稳定可靠。

关键词: 二氧化氯发生器, 监控系统, 可编程逻辑控制器, 触摸屏

Abstract: According to the requirement for chlorine dioxide generator monitoring and alarming system, the Siemens S7-200 programmable logic controller (PLC) is used as the data acquisition and processing unit, the Siemens industrial touch panel Smart 1000 IE as the HMI device and the configuration software WinCC flexible 2008 for making monitoring interface, and the PLC Ethernet communication module CP243-1 for extending monitoring interface to the remote control room. The system achieves the following functions: the monitoring and alarming of the chlorine dioxide generator temperature, pressure, level, flow, dosage. The system has been put into use and is of stable and reliable performance.

Key words: chlorine dioxide generator, monitoring and alarming system, programmable logic controller, touch panel

中图分类号: