基于S3C2410的Windows CE.NET平台定制与驱动开发

doi:10.3969/j.issn.10062475.2010.03.001

计算机与现代化 ›› 2010, Vol. 1 ›› Issue (3): 1-3.doi: 10.3969/j.issn.10062475.2010.03.001

• 操作系统 • 下一篇

基于S3C2410的Windows CE.NET平台定制与驱动开发

赵萌^1，2,宋杰¹,党李成¹,郭振朝¹

1.安徽大学计算智能与信号处理教育部重点实验室,安徽合肥 230039；2.淮南联合大学计算机系,安徽淮南 232001

收稿日期:2009-08-05 修回日期:1900-01-01 出版日期:2010-03-20 发布日期:2010-03-20

Platform Customizing and Device Driver Development of Windows CE.NET Based on S3C2410

ZHAO Meng^1,2,SONG Jie¹,DANG Li-cheng¹,GUO Zhen-chao¹

1.Key Laboratory of Intelligent Computing & Signal Processing, Ministry of Education, Anhui University, Hefei 230039, China;2.Department of Computer, Huainan Union University, Huainan 232001, China

Received:2009-08-05 Revised:1900-01-01 Online:2010-03-20 Published:2010-03-20

摘要/Abstract

摘要： 以Platform Builder 4.2作为嵌入式系统内核及驱动程序开发工具，介绍Windows CE.NET的体系结构。以三星S3C2410作为硬件平台进行操作系统内核镜像定制和CAN总线驱动开发，并下载到开发板，为相似系统的研究开发提供借鉴参考。

关键词: Windows CE.NET, Platform Builder 4.2, 内核镜像定制, CAN总线

Abstract: The system structure of Windows CE.NET is introduced with Platform Builder 4.2 as tools of developing embedded system kernel and driver program, and the operating system kernel mirrorimage and driver program are customized and saved to the board based on S3C2410 as hardware platform.

Key words: Windows CE.NET, Platform Builder 4.2, kernel mirrorimage customizing, CAN bus

赵萌;宋杰;党李成;郭振朝. 基于S3C2410的Windows CE.NET平台定制与驱动开发[J]. 计算机与现代化, 2010, 1(3): 1-3.

ZHAO Meng;;SONG Jie;DANG Li-cheng;GUO Zhen-chao. Platform Customizing and Device Driver Development of Windows CE.NET Based on S3C2410[J]. Computer and Modernization, 2010, 1(3): 1-3.

基于S3C2410的Windows CE.NET平台定制与驱动开发

Platform Customizing and Device Driver Development of Windows CE.NET Based on S3C2410

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价